Electrical Drafter/Designer Company Description Mason & Hanger is a full-discipline architectural, engineering and construction firm. Founded in 1827 and headquartered in Lexington, KY. Mason & Hanger is the longest operating engineering and construction company in the United States, providing a rare stability and deep experience in a wide range of disciplines. Specializing in the support of military, law enforcement and hom ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Day & Zimmermann
Lexington, KY 40507
Jul 6
Electrical Drafter with REVIT Our client, an Architecture and Engineering firm in Los Angeles, has an immediate opening for an Electrical-based Designer/Drafter with 3D / REVIT MEP experience. JOB DESCRIPTION Electrical Designer/Drafter will be responsible for production and design of engineering plans in REVIT MEP. All of the work will utilize the REVIT MEP program. The majority of projects will be retail, quick-serve restaur ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Salary:
From 24.00 to 26.00 USD per hour
Aerotek
Los Angeles, CA 90008
Jul 6
Senior HVAC/Mechanical Designer Our client, an engineering consulting firm that provides mechanical, electrical, plumbing, technology, and lighting design services to institutions, corporations, and governments throughout the United States, has an immediate opening for a Senior-Level Mechanical (HVAC) Drafter/Designer. JOB DESCRIPTION The Senior Mechanical Drafter/Designer will be responsible for the design of commercial and ret ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Salary:
From 40,000.00 to 65,000.00 USD per year
Aerotek
Los Angeles, CA 90008
Jul 6
Electrical Drafter - NEEDED NOW!! WHY WAIT? Are you looking for an exciting new opportunity? This may be your lucky day! It is time for a change, and CDI can help! We have an immediate need for an Electrical Drafter JOB DESCRIPTION the position requires at least 3 years of experience in AutoCAD Electrical. Knowledge of Medium Voltage switchgear is preferred. Located in Wendell NC Designer / Drafter will receive instructions from t ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
CDI Corporation
Walnut Cove, NC 27052
Jul 6
Electrical Drafter - NEEDED NOW!! WHY WAIT? Are you looking for an exciting new opportunity? This may be your lucky day! It is time for a change, and CDI can help! We have an immediate need for a Electrical Drafter JOB DESCRIPTION CDI is currently recruiting for our client a global provider of energy equipment and solutions for the power generation and oil gas industries. This challenging contract opportunity is located at our cli ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
CDI Corporation
Wendell, NC 27591
Jul 2
Electrical Drafter Our client has an immediate need for a Electrical Drafters. Ideal applicants will have Electrical Drafting experience in manufacturing/power sector. Must be proficient in AutoCAD, ideally with version 2006 or more recent. Vocational School diploma, Electrical engineering technology degree preferred. Experience in power plant/industrial power and lighting is preferred. Ability to communicate effect ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Salary:
From 17.00 to 20.00 USD per hour
Aerotek
Wake Forest, NC 27588
Jul 2
Industrial Maintenance Drafter/Designer Aerotek is working with a client in Tempe, AZ that is seeking an Industrial Maintenance Technician/Design and Drafter for a contract-hire opening. Qualified Candidates must have the following background in order to be considered for this opportunity: Success Profile ¿ AutoCAD 2006 ¿ GNIS-Cox GIS mapping ¿ Read and work from Blueprint/Schematics ¿ GE Mark VI Turbine Control Systems ¿ GE Basic Funda ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Salary:
From 18.00 to 19.00 USD per hour
Aerotek
Tempe, AZ 85280
Jul 2
CAD Drafter - Audio Video Industry - Full Time COMPANY INFORMATION: Audio Command Systems established in 1976, provides comprehensive Audio/Video, Multimedia, Automation and Lighting Control Systems to corporations and individuals. Headquarters in Westbury, NY, ACS has additional offices in Florida and California. ACS is proud to have been voted the number one custom integrator in the country by CEPro Magazine five out of the last six years. I ...[more]
Relevant Work Experience:
1+ to 2 Years
Career Level:
Experienced (Non-Manager)
Education Level:
Vocational
Job Type:
Employee
Job Status:
Full Time
Salary:
From 18.00 to 22.00 USD per hour
Audio Command Systems
Westbury, NY 11590
Jul 1
Design Engineer Aerotek is currently looking for talented Design Engineers for an exciting opportunity with a local manufacturing facility. Requirements for the Design Engineer: -There will be two different positions available - Engineers II (4-6 years experience) and Engineers III (8-10 years experience) -Must have Bachelor of Science in Mechanical Engineering (BSME) or Bachelor of Science in Electrical Engineer ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Salary:
From 65,000.00 to 110,000.00 USD per year
Aerotek
Newport News, VA 23608
Jul 1
Structural Engineer - Forensic/Construction/Architect 85-130 K/yr Leading scientific and forensic engineering company seeks a skilled Sr. Structures Engineer in New York City and Washington, DC. Local candidates preferred. Specific areas of expertise needed include: building systems for residential and commercial construction with particular emphasis on the investigation of water intrusion through the building envelope; investigation of structural damage followi ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee
Job Status:
Full Time
Salary:
From 85,000.00 to 130,000.00 USD per year
THINK ENERGY GROUP
New York, NY 10173
Jul 1
Electrical Drafter Our client a mid sized production facility based in Omaha, NE. They are currently seeking an electrical drafter to join their team. Candidates would be responsible for drafting electrical schematics and as-built drawings. This position requires AutoCAD skills and an ability to understand mark-ups. This is a 6 month contract to hire position with competitive pay. For more information contact Jill a ...[more]
Career Level:
Entry Level
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Aerotek
Omaha, NE 68198
Jun 30
Architectural CAD Drafter Job Purpose: Looking for an Architectural CAD Drafter with excellent AutoCAD skills. Must be able to learn and use company drafting standards to create Construction Documents. Possiblity of becoming Project Manager with experience and demonstration of skills required. Duties: * Prepares rough sketches by studying architectural specifications; creating a picture of the physical, functional, and aes ...[more]
Relevant Work Experience:
2+ to 5 Years
Career Level:
Experienced (Non-Manager)
Education Level:
Bachelor's Degree
Job Type:
Employee
Job Status:
Full Time
Salary:
From 30,000.00 to 40,000.00 USD per year
Condray Design Group, Inc.
Lubbock, TX 79401
Jun 29
Electrical PDS DAS (Discipline Application Specialist) We are currently seeking a high caliber Electrical PDS DAS (Discipline Application Specialist) to work on a contract basis. Based in Vancouver, you will be working for one of the world’s leading engineering, procurement, construction and mining companies. Job Description: • Discipline application Specialist on PDS for EPCM projects • Set up, maintain an coordinate administration of PDS • Be the PD ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
TRS Staffing
Vancouver, BC
Jun 25
Electrical Engineer (PE) TITLE: ELECTRICAL ENGINEER REPORTS TO: ELECTRICAL ENGINEER DEPARTMENT MANAGER GENERAL SUMMARY: Provides lighting and power systems for new construction and/or renovation of industrial or commercial structures in conformance to client requirements and applicable codes. Provide the engineering to develop the construction documents for the installation, interconnection and control of electrical and m ...[more]
Job Type:
Employee
Job Status:
Full Time
Company Confidential
Detroit, MI
Jun 25
COMPLETION ENGINEER Needed! Great Opportunity! Manager, Completions Engineering Essential Job Functions Responsibilities: Provide leadership and expert level support for the Completions Group; Completion design including equipment specification and selection (from beginning to tie-end); Evaluate and recommend work-over candidates; Manager completion related budget and AFE generation; Ensure completion design meets all well objectives and perfo ...[more]
Relevant Work Experience:
More than 15 Years
Career Level:
Manager (Manager/Supervisor of Staff)
Education Level:
Professional
Job Type:
Employee
Job Status:
Full Time
Salary:
From 170,000.00 to 180,000.00 USD per year
Leap Recruiting Solutions
Houston, TX
Jun 24
1000917 CAD Drafter I Portland, OR location. Job Description: GENERAL SUMMARY Under minimal supervision prepare construction submittal drawings for system installation to support the branch offices. Essential Position Functions: · Responsible for working with the Application Specialists to design building systems such as Fire Alarm, Access Control, CCTV, Sound, Clocks, and Nurse Call Systems. · Using AutoCAD to prepare ...[more]
Relevant Work Experience:
2+ to 5 Years
Career Level:
Experienced (Non-Manager)
Education Level:
Associate Degree
Job Type:
Employee
Job Status:
Full Time
SimplexGrinnell
Job location not provided
Jun 24
Low Voltage AutoCAD Drafter Low Voltage AutoCAD Drafter Time and Alarm Systems, a leading integrated systems contractor in southern California. Time & Alarm Systems offers a competitive salary and the professional advantages of an environment that supports your development and recognizes your achievements. Job Description : We are looking for a highly self-motivated and energetic CAD operator to join our busy team. The ideal ...[more]
Career Level:
Entry Level
Education Level:
High School or equivalent
Job Type:
Employee, Seasonal
Job Status:
Part Time
Job Shift:
First Shift
TIME and ALARM SYSTEMS
Mira Loma, CA 91752
Jun 24
Drafter IV (LOSC) Job Title: Drafter IV (LOSC) Job Number: 09006HI Job Category: SCA Discipline Primary Location: USA-FL: FLORIDA-CAPE CANAVERAL AFS Schedule: Full-time Job Type: Standard Employee Status: Regular Job Posting: 2009-Jun-23 Description Essential Functions Create new engineering drawings that accurately depict proposed designs, changes and demolition plans to facilities, systems and equipment in suppor ...[more]
Relevant Work Experience:
5+ to 7 Years
Career Level:
Experienced (Non-Manager)
Education Level:
Associate Degree
Job Type:
Employee
Job Status:
Full Time
CSC
CAPE CANAVERAL, FL
Jun 22
MEP Drafter An electrical construction company is looking for a 3D MEP Drafter to take on to their team for a one month contract. Responsibilities: AutoCAD 3D Drafter -They are using MEP, and AutoCAD 3D program -Must have experience using MEP 3D in regards to buildings -MUST have previous experience with 3D drafting -Previous MEP experience. If you are INTERESTED and QUALIFIED for this position please send yo ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Aerotek
Woodridge, IL 60517
Jun 19
Microstation Drafter / Designer Aerotek Energy Services is recruiting a Microstation Drafter for an engineering firm that designs, builds, operates, and maintains power transmission and distribution facilities and systems throughout the United States. Position and Qualifications: - Qualified candidates must be fluent in Microstation and have an electrical background. - The Microstation electrical drafter must also have a strong e ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Salary:
From 18.00 to 23.00 USD per hour
Aerotek
Charlotte, NC 28215
Jun 19
SENIOR DRAFTER - Aerospace EMPLOYEE DUTIES/RESPONSIBILITIES Models, plans, lays out, draws and revises detailed part, assembly and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical or electronics. Utilizes computer aided design equipment and/or graphics tools such as CAD, CAM or Solid Works. Complete ...[more]
Relevant Work Experience:
5+ to 7 Years
Job Type:
Employee
Job Status:
Full Time
Salary:
From 27,675.00 to 46,125.00 USD per year
Spencer Reed
Park City, UT
Jun 18
Electrical Drafter w/ Autocad & Aircraft Experience ESG is in search of an electrical drafter for a position in Lexington, KY. MUST BE ABLE TO ATTAIN OR HAVE IN PLACE A GOVERNMENT CLEARANCE!!!! Three (3) to four (4) years of electrical drafting experience is preferred. Must be proficient using AutoCAD to develop new drawings and be able to incorporate changes from complex red-lines. Must be familiar with drawing standards such as ANSI Y14.5 and MIL ...[more]
Relevant Work Experience:
7+ to 10 Years
Career Level:
Experienced (Non-Manager)
Job Type:
Employee, Temporary / Contract / Project
Job Status:
Full Time
ENTEGEE Engineering Tech Grp.
Lexington, KY 40502
Jun 18
Microstation Drafter Aerotek Energy Services has an opening for a Microstation Drafter. The Microstation Drafter responsibilities are to support their Relay and Control Group. The Microstation Drafter must be fluent in Microstation and come with an Electrical background. The Microstation Drafter must have experience in panel wiring, single line diagrams, relays is ideal. The Microstation electrical drafter must have a ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Temporary / Contract / Project
Job Status:
Full Time
Salary:
From 17.00 to 20.00 USD per hour
Aerotek
Charlotte, NC 28215
Jun 18
Electrical Drafter 3-4 years of electrical drafting experience. Must have experience developing drawings for wire harness fabrication, electrical assemblies, and electrical installations. Must be proficient using AutoCAD and be familiar with drawing standards such as ANSI Y14.5 and Mil-T-3100. Experience processing ECNs and high attantion to detail are required. Please forward all resumes t ...[more]
Career Level:
Experienced (Non-Manager)
Job Type:
Employee, Temporary / Contract / Project
Job Status:
Full Time, Per Diem
ENTEGEE Engineering Tech Grp.
Lexington, KY
Jun 17
Electro-Mechanical Designer - AutoCAD/Manufacturing/Metal Forming 35-50 K/yr A leading manufacturer of equipment in the state of New York is actively interviewing for a Electromechanical Designer to design lighting fixtures, develop fabrication details and produce shop detail drawings. This is a permanent position. Responsibilities Design light fixtures per customer requirements and in accordance with architectural drawings Develop fabrication details and produce AutoCad S ...[more]
